Rolling Mill Auxiliary EquipmentSteewo
Over the years, Steewo has built a culture of service, teamwork, and most important - innovation. With an exceptionally diverse staff and an average tenure of ten years, we are proud that people choose Steewo.
We’re passionate about serving our clients to the fullest, while continuously growing, learning, and innovating. With competencies across multiple industries, we offer our customers a more reliable supply chain and confidence in the long life of their program.
Gear Couplings
Our company manufactures high-quality gear couplings for use in a variety of industries, including the steel industry, cement plants, sugar mill plants, and metal industry. It primarily serves as a connector between two shafts that are working together to deliver power. These stiff and flexible gear couplings are made up of two hubs with an exterior gear and two outer sleeves with an internal gear. Our gear connection is universal and can handle angular, offset, combination, and huge axial moments.
Cold Shear
Cold shear’s primary role is to cut the bars in the layer to a commercial length. Cold cut bars with an open side. Welded steel housing is completely oil-tight. We employ heat-treated and forged alloy steel gears. Shafts are supported by bearings, with the low-speed shaft supported by bearings. Shearing is done with a pair of knives, one fixed and the other mounted on a moveable slide that is started and stopped by an air-operated brake-clutch group. An automated grease system lubricates cold shear.
Roller Table
Roller conveyors or roller tables are commonly utilized in section TMT rolling mills. Conveyors are used everywhere to reduce labor effort. It is necessary to transfer the ingot/billet to the charge furnace, then feed the ingot from the furnace to the roughing mill, and a cooling bed conveyor is used to send the final product to the shearing machine of the desired length.
Crank Type Flying Shear
Crank-type flying shears are used to cut finished stock ranging in size from 10 to 70 mm. The cranks ensured a clean cut on the served ends, eliminating the need for end deburring. These are also start/stop versions with adequately powered variable speed motors to cater to varying product finish line speeds.
Rotary Crop Cobble Shear
These crop-cum-cobble shears are used to hold the stock’s front and back ends together to ensure smooth entry into the rolling mill passes, as well as to chop the oncoming stock into small sizes if the mill encounters cobble.
Straightening Machine
Straightening machines are used to straighten sections such as iron angles, channels, beams, flats, hexagons, squares, and any profile sections such as the Z and F7 sections.
